On the Home Stretch

It's a fact of life that events and circumstances can conspire to delay and reshape our plans, and this has certainly been the case where the instrument pictured is concerned.

Given that building guitars is such as passion for me, it's amazing - and even a little embarrassing! - to reflect on the fact that I began this guitar around twelve years ago. With a busy life that revolved around a nine to five job, time to pursue hobbies was in short supply all those years ago, and progress was understandably slow.

In part because of that situation, recalibrating the balance between work and play became a priority for my partner and for me, and we finally made the momentous decision to relocate, with a view to escaping the pace and pressures of city life, reducing our working hours and living expenses in the process.

After the stress and upheaval of an interstate move, we found ourselves renting a tiny cottage in a small village three hours' drive from Melbourne. While we were happy with our decision, and overjoyed to have made the move, other than for a brief period when I had access to a vacant shop a few hundred metres from home I was without a space in which to work, and guitar building was unavoidably put on hold.

We eventually persuaded our landlord to sell us the house, at which point reality set in: after seeking several quotes from local builders, I had to acknowledge that the cost of having a suitable workshop built to my specifications was prohibitive given our severely reduced income. Building with straw bales had captured my imagination several years earlier, however, and, even for someone like me with no prior building experience, building a straw bale workshop seemed achievable and much more affordable given that I'd complete the bulk of the work myself. Fast forward nearly four years, and my workshop was finally completed - previous blog posts show progress.

With that mammoth building project behind me, pent-up enthusiasm and my typical lack of discipline resulted in me commencing a number of new instruments, and it's only now that I begin the homeward run towards stringing this particular guitar up, hopefully within the next few weeks. Assuming, of course, that life events and circumstances allow it!

Cheers, Pete

Level Sanding and Buffing

I'm still chasing rogue sanding scratches and polish residue on this Claro Walnut/Port Orford OM body, but I'm calling it "done" for the time being. I'll return to it shortly with fresh eyes and renewed enthusiasm.

It's been some time since I last level sanded and buffed a guitar, and I've been reminded once again that a thorough approach to sanding through a sequence of ever-finer sandpaper grits is crucial to attaining the scratch-free finish that I'm looking for. I began levelling the finish with P600 grit wet-or-dry sandpaper, proceeding through P800, P1000, P1500 and P2000 papers, using soapy water as a lubricant, before buffing with Menzerna polishing compound on a buffing wheel. Having done so, I'm close to achieving the desired outcome, but there's considerable work remaining before sanding scratches are reduced to what I consider an acceptable level.

This guitar body is the first of five that I'll be sanding and buffing, and I'm aware that if I'm disciplined enough and pay sufficient attention to detail, I can minimise the level of frustration that I always deal with throughout this time-consuming process.

Cheers, Pete

The Long Wait

As keen as I am to string these guitars up and wave them goodbye, I have no choice but to wait several weeks for the lacquer top-coats to cure before I sand and polish them. I know from experience that to give in to my typical impatience is an exercise in futility, so the long wait begins.

Cheers, Pete

The Finish Line

After what feels an eternity, I managed to begin the arduous process of applying finish to this crop of guitars this morning, with a seal coat of shellac applied ahead of the first coats of lacquer tomorrow.

I have three other guitars under construction, but with the inevitability of cold wet weather ahead I vowed to put them to one side and take advantage of our unseasonably dry autumn with a view to finally completing these instruments, some of which I began years ago.

With fresh ideas in mind, I'm well and truly ready to move on from this collection of instruments, and I've come to the realisation that working on a big batch of guitars like this can detract from my enjoyment of the process. A completed instrument would be nice!

Cheers, Pete

Bridge Day

With a template describing the bridge outline, and an appropriate jig to facilitate routing of the saddle slot, it's a fairly quick and easy job to fabricate these guitar bridges. A rasp, some cabinet scrapers and sandpaper complete the job after the blank has been cut to shape. The underside of the bridge will be shaped to match the dome of the soundboard at a later stage.

The bridges pictured are of Macassar ebony and padauk. Despite its somewhat extravagant colour, I look forward to using the padauk bridges; it's a much low density than the ebony. Unfortunately, padauk is yet another wood species that has recently been added to the CITES list, so these are the last bridges I'll have the opportunity to make from it.

Cheers, Pete

  

What's In a Name?

The back and sides of this guitar are of narra, which is an alternative name for a wood that's most often marketed here in Australia as New Guinea rosewood.

According to Wikipedia, the tree is a species of Pterocarpus native to southeastern Asia, northern Australasia, and the western Pacific Ocean islands, Cambodia, southernmost China, East Timor, Indonesia, Malaysia, Papua New Guinea, the Philippines, the Ryukyu Islands, the Solomon Islands, Thailand, and Vietnam."

The wood is closely related to padauk - it's most definitely not a true rosewood - and as its range extends well beyond New Guinea, I much prefer to choose a less misleading name when discussing this guitar.

Most significantly, it's beautiful, easy to work, smells great and has a good reputation as a tonewood. What's not to like?

Cheers, Pete 

Wow Factor - Australian Blackwood

I couldn't wait to see the grain of this Australian blackwood come to life when epoxy was applied, so I didn't!

This wasn't a particularly expensive set of back and sides, so I'm very pleased that a thin film of epoxy has had such a dramatic effect.

More practically, this not only gives me a head start where pore filling is concerned, but has provided a level of protection to the wood ahead of routing binding channels and installing the ebony bindings.

Cheers

Pete